如何在redhat下宽带拨号上网
发布时间：2014-09-05 15:54:35作者：知识屋
如何在redhat下宽带拨号上网
来北京找工作了，自己的本本一直是redhat系统，所以这需要拨号上网。
1.检查自己的机器是否安装了rp-pppoe
[html]
[root@hadoop1 Desktop]# rpm -qa rp-pppoe
rp-pppoe-3.8-5.fc10.i386
2.如果没有安装rp-pppoe,则安装
[html]
[root@hadoop1 Downloads]# rpm -ivh rp-pppoe-3.8-5.fc10.i386.rpm
3.执行asdl-setup,如过没有该命令，执行pppoe-setup
pppoe-setup: 设置拨号参数，使用一次就行了。
pppoe-connect: 在终端里输入用以拨号上网。
www.zhishiwu.com
pppoe-stop: 很容易理解，这是用来断开链接的。
[root@hadoop1 ~]# pppoe-setup
然后你会看到pppoe-setup会输出如下的提示。
Welcome to the PPPoE client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
现在它提示你输入你在ISP所用的用户名（也叫做帐号,比如我家就是座机号码）。
LOGIN NAME
Enter your Login Name (default work): 051212345678
然后你会看到如下提示，这时他会提示你输入使用连接的以太网接口，不需要输入任何内容，默认值即可。
INTERFACE
Enter the Ethernet interface connected to the PPPoE modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0):
现在系统要求询问你是否希望在没有联网的情况下，系统是否在空闲一段时间后，自动切断同网络的连接。我不喜欢这样，我希望在不用的时候，自己手动断掉连接。于是选择默认值，直接输入回车。
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
接下来，要求你输入如何设置DNS参数，我选择的是输入：server。
www.zhishiwu.com
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
现在，要求你输入对应于帐户的密码,系统会让你输入两次密码确认。
PASSWORD
Please enter your Password: xxxxxx
Please re-enter your Password: xxxxxx
对于下面的提问，你可以不予理会，使用系统的默认参数即可。
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes):
下面要求你输入防火墙的选择，我选择了没有使用防火墙。
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 0
www.zhishiwu.com
现在它要求你确定是否在系统启动时自动去拨号，一般来讲，这是一种浪费，所以我们选择输入默认值，直接输入回车即可。
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):
现在，系统开始总结你设置的参数。要求你确认，此时，你可以输入一个小y来确认。
** Summary of what you entered **
Ethernet Interface: eth0
User name: *sunzhou_110
Activate-on-demand: No
DNS addresses: Supplied by ISP's server
Firewalling: NONE
User Control: yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
好了，当你看到这句话表明你的参数设置结束了。
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/pppoe-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.
但是，此时你还无法联网，你必须手动建立连接， 此时需要运行pppoe-connect命令。如果你看到了类似下面的输出表明你可以上网了。
www.zhishiwu.com
[root@cynicholas ~]# pppoe-connect
RTNETLINK answers: No such process
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
PAP authentication succeeded
local IP address 121.228.29.197
remote IP address 218.4.77.56
primary DNS address 61.177.7.1
secondary DNS address 221.228.255.1
此时你可以运行下面的命令，如果看到域名被正确解析且有回应，则一切OK
[root@hadoop1 ~]# ping www.baidu.com
PING www.a.shifen.com (119.75.218.45) 56(84) bytes of data.
64 bytes from 119.75.218.45: icmp_req=1 ttl=56 time=29.6 ms
64 bytes from 119.75.218.45: icmp_req=2 ttl=56 time=30.2 ms
64 bytes from 119.75.218.45: icmp_req=3 ttl=56 time=29.3 ms
64 bytes from 119.75.218.45: icmp_req=4 ttl=56 time=29.3 ms
64 bytes from 119.75.218.45: icmp_req=5 ttl=56 time=30.0 ms
64 bytes from 119.75.218.45: icmp_req=6 ttl=56 time=28.7 ms
www.zhishiwu.com
最后，如果需要断掉连接，可以运行下面这个命令：
[root@cynicholas~]# pppoe-stop
Terminating on signal 15
Connect time 0.6 minutes.
Sent 2558 bytes, received 2166 bytes.
cat: /var/run/pppoe-adsl.pid.start: No such file or directory
pppoe: read (asyncReadFromPPP): Session 5001: Input/output error
如果你看到了最后一行的错误报告，不予理会它。
如果输入pppoe-connect,一直不停采用一下办法解决
网络链接-DSL-添加上面的账户和密码，进行链接即可。
（免责声明：文章内容如涉及作品内容、版权和其它问题，请及时与我们联系，我们将在第一时间删除内容，文章内容仅供参考）
相关知识
-
linux一键安装web环境全攻略 在linux系统中怎么一键安装web环境方法
-
Linux网络基本网络配置方法介绍 如何配置Linux系统的网络方法
-
Linux下DNS服务器搭建详解 Linux下搭建DNS服务器和配置文件
-
对Linux进行详细的性能监控的方法 Linux 系统性能监控命令详解
-
linux系统root密码忘了怎么办 linux忘记root密码后找回密码的方法
-
Linux基本命令有哪些 Linux系统常用操作命令有哪些
-
Linux必学的网络操作命令 linux网络操作相关命令汇总
-
linux系统从入侵到提权的详细过程 linux入侵提权服务器方法技巧
-
linux系统怎么用命令切换用户登录 Linux切换用户的命令是什么
-
在linux中添加普通新用户登录 如何在Linux中添加一个新的用户
软件推荐
更多 >
-
1
专为国人订制！Linux Deepin新版发布2012-07-10
-
2
CentOS 6.3安装(详细图解教程)
-
3
Linux怎么查看网卡驱动?Linux下查看网卡的驱动程序
-
4
centos修改主机名命令
-
5
Ubuntu或UbuntuKyKin14.04Unity桌面风格与Gnome桌面风格的切换
-
6
FEDORA 17中设置TIGERVNC远程访问
-
7
StartOS 5.0相关介绍，新型的Linux系统！
-
8
解决vSphere Client登录linux版vCenter失败
-
9
LINUX最新提权 Exploits Linux Kernel <= 2.6.37
-
10
nginx在网站中的7层转发功能
