刀片服务器硬盘启动Linux独立安装

blade8:~ # fdisk /dev/sdb
The number of cylinders for this disk is set to 8924.
There is nothing wrong with that, but this is larger that 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): n
Command action
    e   extended
    p   primary partition (1-4)
          p
          Partition number (1-4) : 1
          First cylinder (1-8924, default 1):
          Using default value 1
          Last cylinder or +size or +sizeM or +sizeK (1-8924, default 8924) : 900
          Command (m for help):

Command (m for help): n
         Command action
               e   extended
               p   primary partition (1-4)
          p
          Partition number (1-4) : 2
          First cylinder (901-8924, default 901):
          Using default value 901
          Last cylinder or +size or +sizeM or +sizeK (1-8924, default 8924) : 
          Using default value 8924
          
          Command (m for help):

Command (m for help): a
Partition number (1-4) : 1

Command (m for help): w
The partition table has been altered;

Calling ioctl() to re-read partition table.
Syncing disks.

blade8:~ # mkfs.ext3 /dev/sdb1
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2) 
Fragment size=4096 (log=2)
904960 inodes, 1807304 blocks
90365 blocks (5.00%) reserved for the super user
First data block=0
56 block groups
32768 blocks per group, 32768 fragments per group
16160 inodes per group
Superblock backups stored on blocks:
       32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

The filesystem will be automatically checked every 37 mounts or 180 days, 
whichever comes first. Use tune2fs -c or -I to override.

blade8:~ # grub-install -root-directory=/mnt/sdb /dev/sdb1 -recheck
Probing devices to guess BIOS drives. This may take a long time.
Installation finished. No error reported.
This is the contents of the device map /mnt/sdb/boot/grub/device.map.
Check if this is correct or not. If any of the line is incorrect,
Fix it and re-run the script 'grub-install'.

(fd0)   /dev/fd0
(hd0)   /dev/sda
(hd1)   /dev/sdb

<bootloader>
    <sections>
...
  <section>
        <append>ramdisk_size=8192 install=hd://sda1/SUSE 
          autoyast=file:///mounts/extra/autoinst.xml splash=silent showopts</append>
        <initrd>(hd0,0)/boot/initrd</initrd>
        <kernel>(hd0,0)/boot/linux</kernel>
        <lines_cache_id>3</lines_cache_id>
        <name>SUSE Linux Enterprise Server 10 Installation</name>
        <original_name>install</original_name>
        <root>/dev/sda1</root>
        <type>image</type>
      </section>
...
    </sections>
  </bootloader>

<partitioning config:type="list">
    <drive>
      <device>/dev/sda</device>
      <partitions config:type="list">
        <partition>
  <create config:type="boolean">false</create>
          <filesystem config:type="symbol">ext3</filesystem>
          <format config:type="boolean">false</format>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">1</partition_nr>
          <partition_type>primary</partition_type>
          <size>7402719232</size>
        </partition>
        <partition>
          <filesystem config:type="symbol">swap</filesystem>
          <format config:type="boolean">true</format>
          <mount>swap</mount>
          <partition_id config:type="integer">130</partition_id>
          <partition_nr config:type="integer">2</partition_nr>
          <partition_type>primary</partition_type>
          <size>auto</size>
        </partition>
        <partition>
          <filesystem config:type="symbol">reiser</filesystem>
          <format config:type="boolean">true</format>
          <mount>/</mount>
          <partition_id config:type="integer">131</partition_id>
          <partition_nr config:type="integer">3</partition_nr>
          <partition_type>primary</partition_type>
          <size>max</size>
        </partition>
      </partitions>
      <use>all</use>
    </drive>
  </partitioning>

color white/blue black/light-gray
default
timeout 30

title SUSE Linux Enterprise Server 10 Installation
  root (hd0,0)
  kernel /boot/linux root=/dev/sda1 ramdisk_size=8192 
   install=hd://sda1/SUSE autoyast=file:///mounts/extra/autoinst.xml 
   splash=silent showopts
  initrd /boot/initrd