知识屋:更实用的电脑技术知识网站
所在位置:首页 > 电脑知识  > 路由器

路由器综合路由配置

发表时间:2015-06-17来源:网络

路由器综合路由配置
 
配置三层交换机  www.zhishiwu.com  
Switch>enable
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#vlan 2
Switch(config-vlan)#exit
Switch(config)#interface fastEthernet 0/2
Switch(config-if)#switchport access vlan 2
Switch(config-if)#no shutdown
Switch(config-if)#exit
Switch(config)#interface vlan 1      
Switch(config-if)#ip address 192.168.1.1 255.255.255.0
Switch(config-if)#no shutdown
 
Switch(config-if)#exit
Switch(config)#interface vlan 2
 
%LINK-5-CHANGED: Interface Vlan2, changed state to up
Switch(config-if)#ip address 192.168.2.1 255.255.255.0
Switch(config-if)#no shutdown
Switch(config-if)#end
 Switch#show ip route
Switch#enable
Switch#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#router rip
Switch(config-router)#network 192.168.1.0
Switch(config-router)#network 192.168.2.0
Switch(config-router)#version 2
 
配置R1    www.zhishiwu.com  
Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.2.2 255.255.255.0
Router(config-if)#no shutdown
 
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
 
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
 
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#no shutdown
 
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#network 192.168.2.0
Router(config-router)#version 2
Router(config-router)#exit
Router(config)#router ospf 1
Router(config-router)#network 192.168.3.0 0.0.0.255 area 0
 
配置R2
Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.3.2 255.255.255.0
Router(config-if)#no shutdown
 
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
 
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
 
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.4.1 255.255.255.0
Router(config-if)#no shutdown
 
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
 
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
 
Router(config-if)#exit
Router(config)#router ospf 1
Router(config-router)#network 192.168.3.0 0.0.0.255 area 0
Router(config-router)#network 192.168.4.0 0.0.0.255 area 0
 
(免责声明:文章内容如涉及作品内容、版权和其它问题,请及时与我们联系,我们将在第一时间删除内容,文章内容仅供参考)
收藏
  • 人气文章
  • 最新文章
  • 下载排行榜
  • 热门排行榜